Description

Arkifloor EH is a color pigmented, two-component epoxy floor coating system. It is designed for light to medium-grade traffic and a corrosion control environment. It displays good adhesive properties, and excellent resistance against chemicals on well-prepared cementitious substrates. The gloss finish of Arkifloor EH retards the growth of mould and fungus commonly found on substrates.

Characteristics:
- Excellent resistance to a wide range of chemicals and oil spills
- Dust-proofing capability, reduces floor maintenance
- Strong and durable with a seamless finish
- Excellent impact and abrasion resistance for light to medium vehicular movement
- Easy mixing and application at the site
- Enhances the appearance of the indoor environment
- Retards the growth of bacteria and mould
- Non-slip finish available

Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.

Application Data:
No. of Component: Two
No. of Coat: Two

Coverage:
0.40 - 0.50 kg/m2/2 Coats

Mixing Ratio (By weight ratio):
100 : 25

Overcoating Interval: 8 hours, Max 3 days
Method of Application: By Roller

For none flat finish can add Silicate Sand

Packing Style:
Base 16 kg/can
Hardener 4 kg/can