Description

Arkifloor EHG is a epoxy flooring system with superb chemical resistance and good adhesive properties designed specially for the environment demanded for high specifications of aesthetic and corrosion control. Its standard gives a smooth, uniform and hard surface preventing dust accumulation and able to take medium to heavy-duty vehicular movement. When it is applied in non-slip form, excellent anti-skid performance can be achieved. It is suitable to be applied on old or new concrete and cementitious floor of industrial and commercial laboratories, food factories, production factories, warehouses, workshops, carpark floors, power plants, wafer plants, and chemical storage rooms, etc. It comes in a wide range of colors for your flooring needs.

Characteristics:
- Excellent resistance to a wide range of chemicals and oil spills
- Dust proof
- Excellent impact and abrasion resistance
- Retards the growth of bacteria and mould
- Non-slip finish available

Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.

Application Data:
No. of Component: Two
No. of coat: Two

Coverage:

0.34 - 0.40 ltr/m2/2 Coats

Mixing Ratio (By Volume ratio):
100 : 29.4

Overcoating Interval: 8 hours, Max 3 days
Method of Application: By Roller

Packing Style:
17 ltr/can
5 ltr/can