top of page

Product Name

Arkifloor SLE 2M


Arkifloor SLE 2M is a high performance four-component, self-leveling epoxy floor coating system. Designed specially for impact and chemical resistance, with the ease of application on horizontal surfaces. It comprises high grade epoxy resins, hardener as curing agent and selected fine aggregates with colorfast pigments. It gives a smooth, flat, uniform yet hard coating to keep your indoor environment dust-free and hygienic.

- Self-leveling and dust-proofing capability with seamless finish reduces floor maintenance
-Pre-formulated for use in warm humid environment
-No peeling due to its tough and hard wearing feature
-Excellent impact, chemical and abrasion resistance for heavy vehicular movement
-Retards the growth of fungi and mould
-Easy mixing and application at site

Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.

Application Data:
No. of Component: Four
No. of Coat: Two

3.80 - 4.30 kg/m2/Coat for 2mm thickness

Mixing Ratio (By weight ratio):
4 : 2.6 : 0.6 : 10

Packing Style:
Base 4 kg/can
Hardener 2.6 kg/can
Colour Pack 0.6 kg/can
Aggregate 10 kg/bag

Dear Customer, 

We'd love to hear from you . 

Please send us an email to:

To get the product catalog or detailed specification.

bottom of page