top of page
Arkiseal is a one-component transparent, acrylic based concrete floor sealer. It prevents the development of dust thus reducing the floor contamination. The main field of application is the sealing of sub-surfaces such as concrete, bricks and mortar.
- Dust-proofing features
- Easy application at site
- Maintains and protects new floor finishes
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.
No. of Component: Two
No. of Coat: Two
0.26 - 0.40 ltr/m2/2 Coats
Overcoating Interval: 16 hours
Method of Application: By Roller or Brush
We'd love to hear from you .
Please send us an email to:
To get the product catalog or detailed specification.