top of page

產品名稱

Arkifloor AWG
colour.png

描述

Arkifloor AWG is a one pack reactive curing type acrylic resin water based floor coating. It provides high gloss finish and excellent durability equivalent to conventional solvent based acrylic resin based floor coating. Arkifloor AWG comes in a wide range of colors for your flooring needs. Especially, in factories, warehouse, machine room, electrical room, corridors, stairs, shops and office.

Characteristics:
- Environmental friendly
- Low VOC and low odor
- Easy to apply and fast curing
- High adhesion strength
- Excellent Workability
- Washable

Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.

Application Data:
No. of Component: One
No. of Coat: Two

Coverage:
0.30 - 0.40 kg/m2/2 Coats

Dilution:
0 - 10% with water

Overcoating Interval: 3 hours
Method of Application: By Roller or Trowel

Remark:
For none flat finish can add Silicate Sand

Packing Style:
15 kg/can
pic-ecofresh-cl_-720x509.jpg

尊敬的客戶, 

我們很樂意聽取您的意見。 

請給我們發送電子郵件至:

enquiries@skkhk.com.hk

獲取產品目錄或手冊

特徵
Sample
bottom of page