top of page
產品名稱
Arkifloor TR-5
描述
ARKIFLOOR TR5 is a flooring system comprising of high grade epoxy resin, hardener as the curing agent and selected fine aggregates with colorfast pigments, which gives a flat, hard and tough surface. This highly filled mortar is distinguished by easy workability, it can withstand not only heavily mechanical loading, but also resistant to most chemical grease, oil and humidity. It is an excellent system for both old and new concrete floors that are exposed to heavy vehicular movements in breweries, food factories, production areas, aircraft hangers, manufacturing factories, warehouses, and in most types of workshops, power plants, loading bays and carparks. It is also suitable for use in workshops, power plants, wafer plants, and chemical storage rooms. It comes in a wide range of colors for your flooring needs.
Characteristics:
- Excellent resistance to a wide range of industrial chemicals
- Suitable for use in warm humid environment
- No peeling will occur due to its tough and hard wearing coating
- Excellent impact and abrasion resistance for heavy vehicular movement
- Solvent-free, thick film provides long lasting protection
- Pre-weighed and packed for easy mixing on site and fast to lay on substrate
Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.
Application Data:
No. of Component: Four
No. of Coat: One
Coverage:
7.44 kg/m2/Coat for 5mm thickness
Mixing Ratio (By weight ratio):
4 : 2.6 : 0.6 : 30-60
Overcoating Interval: 7 days
Method of Application: By Trowel
Packing Style:
Base 4.0 kg/can
Hardener 2.6 kg/can
Color Pack 0.6 kg/can
Aggregate 30.0 kg/bag
特徵
Sample
bottom of page