top of page
產品名稱
Arkifloor UT-M
描述
Arkifloor UT-M is a pigmented polyurethane-based paint As a two component coating system, it is suitable for primed surfaces of metal, concrete, mortar, asbestos board, gypsum plaster, PC board and GRC panels. Its coating system is also a protective finishing coat for both the interior and exterior surfaces. It is a recommended metal surface and flooring product for medium corrosion control in car parks, industrial and manufacturing factories and warehouses. It is also suitable for use in workshops, power plants, wafer plants, and chemical storage rooms. It comes in a wide range of colors for your flooring needs.
Characteristics:
- Excellent weathering properties
- Easy application
- Strong and durable
- Fast curing
- Low odor
- Good mar & abrasion resistance
- Enhances the appearance of the surface
Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.
Application Data:
No. of Component: Two
No. of Coat: Two
Coverage:
0.30 - 0.40 kg/m2/2 Coats
Mixing Ratio (By weight ratio):
Base 14.1 Kg
Hardener 0.9 Kg
Overcoating Interval: 8 hours, Max 7 days
Method of Application: By Roller or Brush
Packing Style:
Base 14.1 kg/can
Hardener 0.9 kg/can
特徵
Sample
bottom of page