top of page


Mirac Floor W


Mirac Floor W is a system comprising of specially modified water-based epoxy resins. Its fast drying properties shorten the application hours, and at the same time, provide ease of application As a light-duty floor coating, Mirac Floor W is an excellent system for industrial and commercial laboratories, food factories, production or manufacturing factories, warehouses, and AHU rooms and petrol stations.

Its low odor and low toxicity makes it suitable for use in restaurants and kitchen areas. Mirac Floor W has a gloss finish, enhancing the appearance of any sub-surfaces. It also prevents the accumulation of dust. Mirac Floor W comes in a wide range of colors for your flooring needs. For standard colors, please refer to our Color Chart. Special color request is available. Consult SKK representative for advice.

- Fast drying with low odor and toxicity
- Strong adhesion to substrates
- Excellent durability
- Easy application at site
- Prevents the accumulation of dust

Surface Preparation:
Concrete surfaces should be well cured and free from dirt, dust, oil, grease and foreign matters. Any unsound substrates, cracks, and pot-holes should be made good with the appropriate SKK filler product. Concrete is highly susceptible to uprising moisture, which can decrease the effectiveness of any coating system. Installation of a water-proofing membranes is mandatory to prevent glitches in the dynamics of any coating system. Smooth concrete surfaces may have to be chemically cleaned or mechanically scarified to provide bonding keys before the coating can be laid. Etching neutralizes the alkaline surface and provides a better bond. It also helps remove salt deposits or laitance that can occur on concrete surfaces.
Masonry and Mortar Substrate Masonry surfaces may peel due to efflorescence, where soluble salts are present. It is therefore essential to treat the surfaces free from dirt, dust, oil, grease and foreign matters. Environmental determinants like humidity can also cause — structural or superficial cracks with mortar. Restoration work should be carried out to amend these problems prior to the application of paint. If efflorescence is also evident, it must be removed before repainting. Remove all flaking or chalking paint from the damaged area by wire brushing or sandblasting. If surface is very porous, apply SK Floor Filler, an epoxy resin-based cementitious conditioner to mend the surface.

Application Data:
No. of Component: Two
No. of Coat: Two

0.30 - 0.40 ltr/m2/2 Coats

Mixing Ratio (by weight ratio): by KG
5 : 1

Overcoating Interval: 18 hours
Method of Application: by Roller or Brush

Packing Style:
Base 10 kg/can
Hardener 2 kg/can





bottom of page